TRANSMISSION Ch 2 page 242 10. Insert pressure ring. Figure 786 11. Insert outer and inner disks so that the grooves on the inner diameter of the inner disks are aligned. For the arrangement refer to the current spare parts list. The thickness of the disk packages must not exceed a maxi mum of 0.1 mm. Figure 787 Setting disk clearance 12. Measure distance A from the mounting face of the differential housing to the plane surface of the outer disk using depth gage and Straightedge MX504170. Distance A = e. g. 49.30 mm Figure 788 Setting disk clearance 12.
Measure distance A from the mounting face of the differential housing to the plane surface of the outer disk using depth gage and Straightedge MX504170. Distance A = e. g. 49.30 mm Figure 789 SHOP MANUAL