ZF — Shop Manual: ZF Transmission — Repair, Clutch & Gear Schematics (EN)

Ch 2 page 31 TRANSMISSION Removal of transmission, disassembly NOTE Place the dump truck on level ground and apply parking brake Start with the propeller shaft in the articulation hinge. Release articulation propeller shaft from the transmission output flange. Start the engine and line up the machine Apply articulation lock Turn off main switch in battery case Raise the dump body and lock it with the safety support. Place wheel chocks to the front wheel Figure 8 WARNING 3 Never turn off battery main switch when engine is running Never turn off battery main switch when ignition is on Leave the battery main switch in ON position as long as the lamp (4) is illuminated or flashing.

When the lamp(4) is off, the main switch can safely be turned to OFF position. 2 1 4 To empty thre three accumulators: Figure 9 Repeatedly press the brake pedal until pressure be equal to 0 on the main screen ACC1 and ACC2. Repeatedly turn ON/OFF parking brake button until pressure be equal to 0 on the main screen ACC3. Completely sink down the front suspension. Accumulator 2,15 litre Park brake. (accumulators stationed behind the right mudguard) Accumulator 3,3 litre Rear service park brake. Accumulator 3,3 litre Front service park brake. Figure 10 SHOP MANUAL WARNING