Figure 41 SHOP MANUAL Ch 2 page 40 Dismount the axle catcher bow. Dismount converter prop. shaft. Axle catcher screw: M12x45 -10.9 Torque: 114 Nm Prop shaft screw: 1/2”UNF x64 -10.9 Torque: 141 Nm Figure Disassemble the front transmission bracket attachment. If shims are used, reassemble them at the same place. 1 Use standard tool as shown on the picture below or similar. Assembly: Torque limit ( 1 ) 277 Nm Torque limit ( 2 ) 750 Nm Figur If necessary, loosen the main valve bracket and front bracket connecting transmission to the frame. Disassemble the bracket by removing the 4 screws connecting the bracket to the transmission. 40 2 e 42