TRANSMISSION Ch 2 page 66 Planetary drive “F” Separate planetary drive from housing II Remove the screw plug with O-ring (1). Figure 131 Remove the strain bolt (1) with Ѕ“ extension and long socket wrench WAF19. Loosen the bolted connection (2) planetary drive housing II. Figure 132 Separate the cover by means of puller screws 3x M10 (1) evenly from the housing. Mount the eyebolt (S) (S) Eyebolt 850317-00070 Figure 133 By means of a lifting tackle and assembly lever separate the planetary drive from housing II. Figure 134 SHOP MANUAL