AGS (Code GE1), teach-in process and teach-in faults; exercise 29.10.2003 In order for the automatic gear control to be able to work perfectly without malfunctions after various repair and maintenance tasks have been carried out on the clutch and transmission, it is necessary to initialize a "minor" or "major" teach-in process in the AGS system depending on the situation.
Press and hold the function button and the neutral button on the AGS sensor unit Ignition "On" When "N" begins flashing in gear display, start engine Teach-in process successfully completed if "N" appears in the gear display TR AGS (Code GE1), teach-in process and teach-in faults; exercise 93 All other positions for shifting the gear and gate are determinedby the AGS control unit on the basis of the positions "moved to" and are likewise stored as learned values. During the "minor" teach-in process, the clutch learned value is not retransferred to the AGS control unit. During the "minor" and "major" teach-in process, the following positions are moved to during the teach-in process:
Description of the clutch and transmission teach-in process ("Minor, Major" teach-in process) in the AGS "Major" teach-in process 10/03 Trucks • Transmission Telligent automatic transmission in ACTROS and ATEGO > Specialist training Press and hold the neutral button on the AGS sensor unit Ignition "On" Teach-in process successfully completed if "N" appears in the gear display Please note the visual displays during the teach-in process! 1. Gear R 2. Gear 5 and 6 3. Open and close clutch 2x consecutively "Minor" teach-in process