AGS (Code GE1), clutch sensing 29.10.2003 N25.20-2074-02 B2 Clutch travel sensor A Basic position B Pressure position TR AGS (Code GE1), clutch sensing 97 1 Release bearing 2 Pressure piston 3 Preload spring 4 Housing 5 Transmission input shaft The measured sensor values are displayed in counts. The control unit subdivides the range "Hydraulic central release bearing not activated" through to "Hydraulic central release bearing fully activated" into "Clutch open", "Intermediate position" and "Closed". The pressure piston of the hydraulic central release bearing is moved in the direction of the clutch when the clutch is actuated. The sensor tappet moves away from the sensor.
The sensor value increases. On account of the wear on the drive plate, the pressure piston travels towards the clutch, the clutch tappet is immersed in the sensor to a lesser extent and the sensor value increases. The sensor value, zero point with a new clutch, is stored in the control unit and can be compared with the sensor value of the current zero point. The difference between these two values represents the wear. Basically the automatic gearshift system (AGS) is fitted with a clutch travel sensor. This sensor is connected to the AGS control unit. The clutch travel sensor records the movement of the hydraulic central release bearing.
The clutch travel is evaluated on an inductive basis and, as such, is contactless and wear-free. 10/03 Trucks • Transmission Telligent automatic transmission in ACTROS and ATEGO > Specialist training