"Clutch characteristics" is one of the points listed in the "Actuations" menu. Confirm this menu option and follow the further instructions given by DAS. The stored clutch characteristics are then deleted from the control unit. After some 6-7 shift operations the new clutch characteristics are identified in the FR control unit and stored. These serve as the new basis for adjusting the clutch response. The start-off and clutch response may seem rather awkward during the first 6-7 shift operations required for teaching in the new clutch characteristics. TR EAS II - (Code GE2), clutch characteristics 35 The clutch characteristics are reset by means of DAS in the FR control unit.
The resetting of the "clutch characteristics" is menu-assisted. The clutch characteristics are continually teaching themselves in automatically while traveling. The "adjustment" of the clutch characteristics does, however, become more sluggish as the length of operating time increases. The clutch characteristics therefore need to be reset after the following work has been carried out:
10/03 Trucks • Transmission Telligent automatic transmission in ACTROS and ATEGO > Specialist training FR control unit replaced Engine or transmission removed or replaced Work performed on clutch and clutch operation Clutch actuator replaced "Minor/major teach-in process" carried out in the GS Teaching in clutch characteristics Resetting the clutch characteristics