The control unit for automatic gear control (AGS) (A92a1) then ensures that the clutch is opened and closed correctly and ensures actuation of the gear and gate solenoid valves. The shift commands of the sensor unit for the automatic gear control (AGS) (A93) are read in by the control unit for drive control (FR) (A3), compared with shift- related data of other control units and relayed as shift signals via the transmission CAN (CAN 5) to the control unit for automatic gear control (AGS) (A92a1).
During and after shifting, the control unit for automatic gear control (AGS) (A92a1) transmits CAN messages to the control unit for drive control (FR) (A3) with information for displaying the shift status and for emitting warning sounds via the transmission CAN (CAN 5). TR Power train networking - AGS (Code GE1), ATEGO 68 The control unit for drive control (FR) (A3) in turn relays these to the instrument cluster 2000 (P4), which displays the shift status and, if necessary, emits warning sounds. 10/03 Trucks • Transmission Telligent automatic transmission in ACTROS and ATEGO > Specialist training