W26.21-112906 W26.21-112612 The hydraulic pressure reservoir (18) reserves the pressure generated by the hydraulic pump (A92m1), makes it available to the automatic gear control (AGS) system and absorbs pressure fluctuations. Supply for at least 4 shift operations in the event of hydraulic pump failure. TR AGS (Code GE1), location of the AGS components on the transmission and their task 76 The hydraulic pressure reservoir is filled with a gas. 10/03 Trucks • Transmission Telligent automatic transmission in ACTROS and ATEGO > Specialist training Aided by an electric motor, the hydraulic pump (A92ml) generates the hydraulic pressure required for shifting.
At "Ignition On" the hydraulic pump starts up and switches off after 8 seconds; if no pressure increase is detected in the system, a fault code is set. Hydraulic pump and hydraulic pressure reservoir Cutoff pressure: over 85 bar Cut-in pressure: below 60 bar