. MAINTENANCE MAINTENANCE PROCEDURE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING Checking (1) of the monitor panel flashes, 4 - 21 When usin g compressed air , there is danger of dirt f lying and causing personal i Always we ar protective glas ses, dust mask, or other protective equipment. When rem oving the outer ele ment from the air cleane r body, it is dangerous to pull it out by force. When w orking in high pl aces or where t he foothold is poo r, be careful not to fall b ecause of the r eaction w hen pulling out the outer el NOTICE an the air cleaner element until the air cleaner clogging monitor on the monitor panel light up.
If the element is Do not cle an the air cleaner element until the air cl eaner clogging monitor on t up. If the eleme nt is cleaned fr equently before th e air cleaner clogging m onitor light up, the air c leane r will not be able to dis play its performance fully, and the cleaning effici ency will also go down. stuck to the element will fall inside the inner element. In addition , during the clean ing operation, more dirt stuck to the element wil l fall inside the inner elemen If i nspecti on, cleaning, or m aintenance is carried out with the engin e runnin g, dir t will enter the engine a nd cause dama ge to the engine . Always stop the engine before carrying o ut these operations.
If air clean clean the ai r cleaner eleme Replacing element, O-ring ement has been used for one year, or air cleaner Replace element, O-ring If the el ement has bee clogging monitor (1) on the monitor panel lights up after the ned, replace outer element (5), inner 8). e (4) if it is damaged or if the rubber is hts up after t he element has been clea element (6), and O-ring ( Replacin g vacuator valv Replace vacuator valve markedl y deformed.