. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT to 6 - 14 4. Set the lock lever to LOCK position 5. eliminate the inte rnal pressure in the hydraulic circ 6. Place a container under the filter ele ment to catch the oi l. 7. Aft er checking th at the hydraulic o il temperatur e has gone down, turn filter c element (2). ase (1) to the left, remove it, then take out d parts, then install new element (2). ust be installed facing in the correct direction. 8.
Clean the remove Element (2) m d parts, then insta ust be installed faci ll new elemen ng in the corre Set direction Y with the holes in i t facing up, an d insert the hole in eleme nt (2) on the protruding portion inside filter inside head (6). 9. Install new O-ring (3) to filter case (1) , then tighten fi lter ca se (1) to a tightening tor que of 25 - 35 Nm (2.6 - 3.6 kgm , 18.8 - 26.0 lbft ).