. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT When working mode selector switch (1) is pressed, the screen switches to the working mode selection screen. If switch F5 is pressed, the screen returns to the working mode selection screen without changing to the breaker mode. If a slide arm or other special attachment is installed and the mode is switched to the breaker mode by mistake, it may lead to serious danger, such as the work equipment suddenly dropping. 6 - 20 If the working mode pi lot monitor does not displ ay B for the br eaker mode, press working mode selector switch (1) and set to the ws. breaker mode as follo 1.
Press working m ode selector switch (1) or press switch es F3 or F4 to select br eaker mode B. de B highlighted in yellow, do one of the t the selection. mode selector switch (1) pressed. 6. or 5 seconds. 2. With breaker mo following to accep Keep working Press switch F Leave as it is f 3. If the breaker mod e is selected, "Really Set Breake r Mod e?" is displayed on the switch F6. screen. To set to the breaker mode, press press Precautions when usi ng p valve is at the FREE position. rking mode is B mode. ath of the oil, see "HYDRAULIC CIRCUIT (PAGE 6-8)". whether it is necessary to install an accumulator for the attachment circuit, contact the acturer and then decide.
Check that the sto p valve is at the FREE po sition. Check that the wo rking mode is B mode. For details of the p ath of the oil, see "HYDRAULIC CIRC UIT (PAGE When considering whether it is necessary attachment manuf acturer and then decide. For other precauti ons when handling the br eaker, f ollow t he instruction manual from the breaker manufacturer and use the break er correctly. The deterioration o f the hydraulic oil when us ing the break er is much f aster than for normal operations, so reduce the maintenance i nterval for the hydraulic o il and e lemen For details, see "M AINTENANCE INTERVA L FOR HYDRAULIC BREAKER (PAGE 4-1