Ditch Witch CX-Series (C12x, C16x, C24x, C30x) — Equipment Modification

Cx Series Operator’s Manual Overview - 3 Intended Use Intended Use p The C12x, C16x, C24x, and C30x pedestrian trenchers are designed to install buried service lines. This machine is intended for operation only according to the instructions in this manual. Operate machine in ambient temperatures from 15° to 115°F (-9° to 46°C) for electric start machines and 20° to 115°F (-7° to 46°C) for rope start machines. Contact your Ditch Witch® dealer for provisions required for operating in extreme temperatures. Use in any other way is considered contrary to the intended use. These machines should be used with genuine Ditch Witch® chain, teeth, and sprockets.

They should be operated, serviced, and repaired only by professionals familiar with their particular characteristics and acquainted with the relevant safety procedures. Equipment Modification This equipment was designed and built in accordance with applicable standards and regulations. Modification of equipment could mean that it will no longer meet regulations and may not function properly or in accordance with the operating instructions. Modification of equipment should only be made by competent personnel possessing knowledge of applicable standards, regulations, equipment design functionality/requirements and any required specialized training.

Model Max depth Max width 24” (610mm) 36” (915mm) 36” (915mm) 48” (1.2m)