daewoo — Daewoo SB4136E00 Service Manual for G420E/G424E Tier LP Engine Lift Trucks

N-CA55-500TR Mixer Removal Steps: 1. Close the liquid outlet valve in the forklift cylinder or fuel storage container. 2. Purge the system of fuel by starting the engine and running until all trapped fuel in the system is exhausted and the engine shuts down. 3. Remove the air horn air inlet adapter and hose (Figure M1-1). 4. Mark the two vacuum lines to the mixer and throttle adapter for identification; they must be installed correctly for proper operation. Remove the two vacuum lines (Figure M1-2). 5. Remove the vapor fuel inlet line (Figure M1-3). 6. Remove the electronic throttle connector (Figure M1-4). 7.

Remove the four bolts that mount the throttle adapter to the electronic throttle body (Figure M2- 5). 8. Remove the mixer/adapter assembly from the throttle by gently pulling upwards. NOTE There will be a plastic o-ring spacer and an o-ring inside this adapter, be careful not to lose these items when removing the mixer/adapter assembly from the throttle (Figure M3). O-Ring 1 Spacer 4 3 2 Figure M3 Figure M3 5 Figure M2 G420E/G424E Tier LP Engine N-CA55-500TR Mixer 71