Engine oil replenishment 1. Park the vehicle on the flat and solid ground; 6. In order to avoid overfilling the oil, the oil should be filled in small amounts for several times. Each time a small amount of oil should be filled and the engine oil level shall be checked (it takes a couple of minutes for the oil to flow from the filler to the oil pan); Engine oil change 2. Open the engine compartment hood; Please go to BAIC Motor Dealership to change the engine oil. 3. Remove the engine trim cover; Maintenance and servicing 4. Place a rag around the filler to prevent oil from dripping onto the engine. 7.
When the oil level reaches between the maximum scale mark and the minimum scale mark, stop adding oil and tighten oil filler cap. If the vehicle is running in bad conditions, such as: Frequent short-distance driving. ● Long idling (e.g. taxi). 8. Put away the rag and clean around the filler. ● Driving in dusty area. ● Often towing the trailer to drive. ● Driving in alpine and cold areas. 5. Open the oil filler cap by turning it counterclockwise; Then the maintenance frequency of the related items must be increased or the maintenance interval must be shortened between regular maintenance.
152 Engine oil is a highly combustible substance When filling oil, be careful not to spill oil onto hot engine or exhaust system components. Be sure to replace the engine oil regularly according to the "Maintenance Schedule". If the oil level exceeds the maximum scale mark, do not start the engine. Otherwise, the catalytic converter and engine may be damaged. If you fill too much, contact the BAIC Motor Dealership to eliminate excess oil.