6. Unscrew the faulty wheel nut counterclockwise with a wheel nut wrench; 7. Rotate the jack assembly clockwise to lift the vehicle until the faulty wheel leaves the ground; Emergency handling 8. Remove the wheel nut, and then remove the faulty wheel. Put the outer surface of the faulty wheel upward at a suitable position under the vehicle and replace it with the spare wheel. 175 When the vehicle is running, the heat generated by the brake system will cause the wheel nut to become hot, so be careful of burns when removing the wheels. Do not use jack assembly that are not equipped with the vehicle. Do not jack up the vehicle too high.
Strictly observe the operation precautions for jack assembly. Observe the vehicle continuously during lifting. If you feel obvious inclination or abnormal movement of the body, stop lifting, find out the problem, and then lift it again. Do not jack up the vehicle out of specified support points. Before jacking up the vehicle completely, the nut of the faulty wheel must be loosened. Do not remove wheel nut until the wheel is off the ground. Do not put any shim on or under the jack assembly.