Before the damaged fuse cannot be determined as a fault, replace all the damaged fuses and check whether the electrical equipment can operate normally. If there is still a fault, please contact BAIC Motor Dealership for maintenance. If a replacement fuse with the same rating blows again shortly, it indicates that the vehicle may has a serious electrical fault. At this time, the use of faulty electrical equipment should be prohibited, and the blown fuse should be left in the fuse box, and contact the BAIC Motor Dealership for maintenance. Pull out the fuse corresponding to the electrical equipment that has stopped working and check it.
Emergency handling Check whether the wire in the fuse is blown. If it has been blown (the fuse shown is disconnected), replace it with a spare fuse of the same or lower Amp value. Using the fuse puller on the fuse box cover to pull out the fuse. 178 If the vehicle cannot be moved because there is no spare fuse available for replacement, the fuse of the same or lower amp value can be removed from other circuits to replace it, but it must be confirmed that the electrical equipment will not be used temporarily, and it will not affect the driving of the vehicle, such as the fuse of the cigarette lighter or radio.
If you use a spare fuse with a low Amp valve to replace the blown fuse, you should also replace it with a fuse with a correct rating as soon as possible if the fault is eliminated.