BAIC U5 PLUS series — 1 (20)(1)

After the reset After the reset, the interface displays four types of information: trip meter, average fuel consumption, driving time, and average speed since the last reset. Clearing method: 1. In the display interface, short press the roll wheel to enter the clear page, or press and hold the roll wheel to directly clear; After self-fueling After the refueling, the interface displays four kinds of information: trip meter, average fuel consumption, driving time, and average speed since the last refueling. Clearing method: 1. The fuel quantity change is detected to be greater than 6L (it shall be ensured that the fuel quantity is greater than 6L at a time); 2.

The trip meter has indicates the maximum value of 9,999.9 km; Trip meter can accumulate the driving mileage in a certain interval. Display range: 0.0 9,999.9km. Trip meter is the accumulated mileage after refueling. Display range: 0.0~9,999.9 km. 2. The trip meter has indicates the maximum value of 9,999.9 km; Operating system and equipment 3. Disconnect the battery. 3. Disconnect the battery. The average fuel consumption is the average fuel consumption of the trip meter driving distance. When clearing, trip meter / average fuel consumption will be cleared at the same time. The average fuel consumption is the average fuel consumption of the trip meter after the refueling.

When clearing, trip meter / average fuel consumption will be cleared at the same time. The driving time is the accumulated travel time after refueling, the timing of which will start when the ON/OFF button lies in the "RUN" mode. The maximum display value is 99:59. The driving time is the accumulated time for the driving, the timing of which will start when the ON/OFF button lies in the "RUN" mode. The maximum display value is 99:59. The average speed is the speed value of the mileage traveled in the driving time divided by the driving time. The average speed is the speed value of the mileage traveled in the driving time divided by the driving time. 39