BAIC U5 PLUS series — 1 (25)(1)

Position lamp on indicator lamp (green) signaling the unfastened driver's seat belt will flash, accompanied by a sound alarm, and the corresponding seat in the alarm pop-up window will turn red simultaneously. It indicates the working state of the position lamp, and goes on when the position lamp is turned on. Automatic light indicator lamp (white) * Fault indicator (yellow) Operating system and equipment This indicator lamp indicates the working status of the automatic lighting system. When the automatic lighting system is working, this lamp will light up. When there is fault information under "Fault Viewing" menu, this lamp will come on.

OFF ESP closing indicator lamp (yellow) When the start/stop button is in the "RUN" mode, the light is on for self-check, and then goes out after self-check. Driver seat belt unfastened warning lamp (red) This light indicates the status of the seat belt on the driver side. When the driver does not fasten the seat belt, this light will be on. This lamp indicates whether the ESP system is turned off, and will come on when the ESP system is turned off.

When the vehicle speed is ≥ 15 km/h, or the continuous driving time of vehicle is > 60 seconds or the continuous driving distance of the vehicle is > 300 m, and the driver's seat belt is not fastened, the warning lamp 49 During normal driving, turning on the ESP system will help improve the comfort and safety of the vehicle, but you shall always drive carefully!