Manual adjustment of front passenger seat Adjustment of backrest inclination: Seat heating * If you need to turn off the seat heating function, please press the button until the 2 lamps of the seat heating button turn off. Pull the adjustment handle ② , upwards and shake the seat backrest forward and backward to a proper inclination angle at the same time; Loosen adjustment handle ② , and shake the backrest back and forth slightly until the backrest is reliable locking. The heating operation of the front passenger seats is the same as that of the driver's seat. Operating system and equipment The seat heating button is located on the air conditioning control panel.
Forward or backward adjustment of the seat: Pull up the adjustment lever ① , under the front of the seat, and move the seat back and forth to a suitable position at the same time; Loosen adjustment lever ① , and move the seat back and forth slightly until the seat is reliable locking. When the start/stop button is in the "RUN" mode, press the driver's seat heating button, and the driver's seat heating function will be turned on. Press the button repeatedly to set the desired heating gear. 83 To avoid damaging electrical components inside the front seat, do not kneel on the seat or apply pressure to a point on the seat cushion or backrest.
Do not use seat heating function if you are less sensitive to pain and temperature. This may cause heater burns to your back, buttocks and legs.