Air volume adjustment knob operated through the mode switching button, and the system remains in the standby state. The remaining function icons are turned off and not displayed. Rear windshield defrost and defogging button feet. : airflow to the feet. Turn the knob clockwise to allow fast increase of air speed at outlet, and turn the knob counter clockwise to allow fast decrease of air speed at outlet. Press the defrost and defogging button of rear windshield to turn on/off the rear windshield heater.
After this button is pressed, it will be turned on for about 15 minutes under the circumstances that start-up conditions are met and then turned off automatically, or turned off manually by pressing the button again. : The airflow blows on the front windshield and feet. During mode switching, the air volume gradually reaches the set gear with mode switching. Operating system and equipment Front windshield defrost and defogging button Cooling on/off button (A/C key) Press the front windshield defrost and defogging button and the system enters the front windshield defrost/defog mode.
After pressing this button, the A/C cooling function will start automatically, and the air volume will be automatically adjusted to gear 5. It is recommended not to manually turn off the A/C cooling function, otherwise the defog efficiency will be affected. Recirculation/fresh air selector button Press the A/C button, the indicator lamp on the button turns on, the compressor starts to run, and the A/C icon will be displayed on the display. When the key is pressed again, the compressor stops running, the indicator lamp on the key goes out, and the A/C icon on the display screen disappears.
When the indicator lamp is on, it indicates the inner circulation mode, and when the indicator lamp is off, it indicates the outer circulation mode. After pressing the recirculation/fresh air selector button, the system switches to the cycle mode (if the cycle is internal before pressing, the cycle is external after pressing; and vice versa). Temperature adjustment knob This knob can adjust the air outlet temperature. Turn the knob clockwise to increase the temperature, and counterclockwise to decrease the temperature. System off (OFF button) When the A/C system is turned on, press the OFF key, and the system enters the standby state.
In this state, only the air outlet pattern and the internal/external circulation icon are shown on the display. The corresponding function can be Press the mode switching button, the mode cycle switches in sequence: Mode switching button : airflow to the face. : airflow to the face and 92 During the defogging period, if the temperature is low, you can manually adjust the temperature adjustment button of the air conditioner to adjust the outlet air temperature, so as to ensure the comfort and defog efficiency in the car.