Fan speed control area Separately touch the face-blowing area: the airflow blows to the face. button once for each point, and set the temperature to decrease by 1 gear; In the temperature regulation area, slide down to set the temperature to decrease. the A/C icon on the display screen disappears. This area allows you to adjust the airflow at the air outlet and displays the corresponding air speed gear. ● Separately touch floor air outlet area: the airflow blows to the foot. Recirculation/fresh air selector button When the indicator lamp is on, it indicates the inner circulation mode, and when the indicator lamp is off, it indicates the outer circulation mode.
After touching the recirculation/fresh air selector button, the system switches the cycle mode (if the cycle is internal before touching, the cycle is external after touching; and vice versa). Operating system and equipment Touch air volume increase button once to increase the air volume by 1; In the fan speed control area, slide upward to increase the wind speedThe maximum wind speed is 8th gear. ● Simultaneously touch top air outlet area and floor air outlet area: airflow blows to the face and feet. When the A/C system is turned on, touch the "OFF" key, and the system enters the standby state.
In this state, only the air outlet pattern and the internal/external circulation icon are shown on the display. The corresponding function can be operated through the mode switching button, and the system remains in the standby state. The remaining function icons are turned off and not displayed. System off (OFF button) ● Simultaneously touch window blowing area and floor air outlet area: airflow blows to the front windshield and feet. Touch air volume decrease button once to reduce the air volume by 1; In the fan speed control area, slide downward to decrease the air speed.The minimum wind speed is 1st gear.
During mode switching, in order to increase comfort, the air volume gradually reaches the set gear with the mode switching. Front windshield defrost and defogging button In the standby mode, touch the air volume increase button or air volume decrease button, and the A/C system will be turned on. Touch the front windshield defrost and defogging button and the system enters the front windshield defrosting/defogging mode. After touching the button, the A/C cooling function will start automatically, and the air volume will be automatically adjusted to gear 5. It is recommended not to turn off A/C manually, otherwise the defog efficiency will be affected.
Temperature regulation area Cooling on/off button (A/C key) This zone can adjust the outlet air temperature. Touch the temperature rise button once for each point, and set the temperature to increase by 1 gear; In the temperature regulation area, slide upward to increase the set temperature Touch the A/C key, the indicator lamp on the key lights up, the compressor starts to run, and the A/C icon will be displayed on the display. When the key is touched again, the compressor stops running, the indicator lamp on the key goes out, and Mode switching area By touching the face-blowing, foot-blowing, and window -blowing areas, you can switch the air pattern as: Touch the temperature down 94