Air volume adjustment knob not displayed. Front windshield defrost and defogging button then turned off automatically, or turned off manually by pressing the button again. Press the shutdown button, and then the A/C system stops running and the control unit shuts down. Turn the knob clockwise to allow fast increase of air speed at outlet, and turn the knob counter clockwise to allow fast decrease of air speed at outlet. Press the front windshield defrost and defogging button and the system enters the front windshield defrost/defog mode. After pressing this button, the A/C cooling function will start automatically, and the air volume will be automatically adjusted to gear 5.
It is recommended not to manually turn off the A/C cooling function, otherwise the defog efficiency will be affected. Temperature adjustment knob This knob can adjust the air outlet temperature. Turn the knob clockwise to increase the temperature, and counterclockwise to decrease the temperature. Press the mode switching button, the mode cycle switches in sequence: Mode switching button Cooling on/off button (A/C key) Operating system and equipment : airflow to the face and feet. : airflow to the face. Press the A/C button, the indicator lamp on the button turns on, the compressor starts to run, and the A/C icon will be displayed on the display.
When the key is pressed again, the compressor stops running, the indicator lamp on the key goes out, and the A/C icon on the display screen disappears. Fully automatic operation key (AUTO key) : airflow to the feet. Press the AUTO button and the A/C system to enter the fully automatic operation mode. In this mode, press any key among the mode switching, air volume adjustment, A/C key, internal/external circulation switching key, and front windshield defrost and defogging buttons, and the system will execute the command of the key and exit the AUTO state. Other functions that were originally automatic to run continue to be controlled automatically by the system.
Press the rear windshield defrost and defogging button and temperature adjustment, and then AUTO mode will continue to operate without being affected; : The airflow blows on the front windshield and feet. During mode switching, the air volume gradually reaches the set gear with mode switching. Recirculation/fresh air selector button System off (OFF button) When the indicator lamp is on, it indicates the inner circulation mode, and when the indicator lamp is off, it indicates the outer circulation mode.
After pressing the recirculation/fresh air selector button, the system switches to the cycle mode (if the cycle is internal before pressing, the cycle is external after pressing; and vice versa). When the A/C system is turned on, press the "OFF" key, and the system enters the standby state. In this state, only the air outlet pattern and the internal/external circulation icon are shown on the display. The corresponding function can be operated through the mode switching button, and the system remains in the standby state.
The remaining function icons are turned off and Rear windshield defrost and defogging button Press the defrost and defogging button of rear windshield to turn on/off the rear windshield heater. After this button is pressed, it will be turned on for about 15 minutes under the circumstances that start-up conditions are met and 97 During the defogging period, if the temperature is low, you can manually adjust the temperature adjustment button of the air conditioner to adjust the outlet air temperature, so as to ensure the comfort and defog efficiency in the car.