Control functions tor is displayed, push the “MODE” button again to display the grip warmer indica- tor. 1. Thumb warmer adjustment switch TIP G The grip warmer, rear shock absorber com- pression damping, and thumb warmer lev- els are displayed for 5 seconds after releasing the corresponding adjustment switch, then the display switches to the fuel meter. 1. Grip warmer indicator “ 2. Rear shock absorber indicator “ 2. To raise the temperature, press the grip warmer/rear shock absorber compres- sion damping adjustment switch to “HI”, and to lower it, press the switch to “LO”. To adjust the rear shock absorber compres- sion damping level 1.
Push the “MODE” button and make sure that the rear shock absorber indicator is displayed. If the grip warmer indicator is displayed, push the “MODE” button again to display the rear shock absorber indica- tor. G The top segment of the fuel meter, grip warmer level indicator, rear shock absorber compression damping level indicator, and thumb warmer level indicator flashes once when the corresponding adjustment reach- es the maximum level. The bottom segment of the fuel meter, grip warmer level indica- tor, rear shock absorber compression damping level indicator, and thumb warmer level indicator flashes once when the corre- sponding adjustment reaches the minimum level.
G When the engine is started, the grip warm- er, rear shock absorber compression damping, and thumb warmer levels are set to the levels selected when the engine was stopped. To adjust the grip warmer temperature 1. Push the “MODE” button and make sure that the grip warmer indicator is dis- played. If the rear shock absorber indica- 14 1. Rear shock absorber indicator “ ”