Yamaha Motor Corporation RX10GTY/RX10LTGTY — Periodic maintenance and adjustment

Periodic maintenance and adjustment 7. Install the new bulb, and then hook the bulb holder onto the headlight unit. NOTICE: Keep oil and your hands away from the glass part of the bulb or its life and illumination will be affect- ed. If the glass is oil stained, thor- oughly clean it with a cloth moistened with alcohol or lacquer thinner. [ECS00621] 1. Screw 2. Headlight access panel 3. Disconnect the headlight coupler. 4. Remove the bulb holder cover. 1. Do not touch the glass part of the bulb. Bulb type: Halogen bulb 8. Install the bulb holder cover, and then connect the headlight coupler. 9. Install the headlight access panel and the top cover. 1. Headlight coupler 2. Bulb holder cover 5.

Unhook the bulb holder by pushing it in, then clockwise. ESU12270 Adjusting the headlight beams 1. Remove the top cover. (See page 41 for removal procedures.) 2. Use a Phillips screwdriver to turn the headlight beam adjusting screw and ad- just the headlight beams. To lower the headlight beams, turn the headlight beam adjusting screw in direction (a). To raise the headlight beams, turn the head- light beam adjusting screw in direction (b). 1. Bulb holder 6. Remove the bulb. 65