Periodic maintenance and adjustment position and disconnect the negative bat- tery lead to prevent accidental short-cir- cuiting. 1. Fastener 2. Air temperature sensor coupler 4. Loosen the joint clamp bolts. 1. Remove the shroud, the left and right side covers, and the top cover. (See page 41 for removal procedures.) 2. Remove the headlight unit bolts, discon- nect the headlight couplers and speed- ometer coupler, and then remove the headlight unit. 1. Joint clamp bolt 5. Slide the clamps away from the air filter case, and then disconnect the crankcase breather hose and the bypass air hose. 1. Headlight unit bolt 3.
Unhook the air filter case fastener and disconnect the air temperature sensor coupler. 1. Crankcase breather hose clamp 2. Bypass air hose clamp 3. Crankcase breather hose 4. Bypass air hose 6. Slide the clamp down, and then discon- nect the air filter case drain hose. 67 eplacing a fuse S00550 WARNING e sure to use the specified fuse. A wrong se could cause electrical system dam- ge or A FIRE HAZARD. S00631 NOTICE e sure to turn the main switch to the off