volvo — MID 130 PSID 254 DIEE Signal

Group 28 Troubleshooting MID 130 PSID 232 Powertrain CAN MID 130 PSID 254 DIEE Signal 102 Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause: Note: This fault code is valid for vehicles where a POWERTRAIN CAN link exists between the TECU and the engine _ FMI 2 • Data erratic, intermittent, or incorrect • CAN communication does not work • Yellow lamp is sent • Slow gear shifts • N/A FMI 9 • Abnormal update rate • Message missing on J1939 from the following control unit: Engine Control Unit (EECU) • Yellow lamp is sent • Slow gear shifts • N/A Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause:

FMI 3 • Voltage above normal or shorted high • The voltage level for the DIEE pin is high • Yellow lamp is sent • Cranking is inhibited • Engine cannot start • All communication with the control unit is disabled except for programming of MSW • N/A