Group 28 Troubleshooting MID 128 PPID 437 Aftertreatment Injector Fuel Pressure Sensor 41 Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause:
FMI 2 • Data erratic, intermittent or incorrect • Sensor is not rational • N/A • Faulty shut off valve • Sensor failure FMI 3 • Voltage above normal or shorted to high source • Short to battery on the metering side • Open in the ground line • N/A • Faulty harness • Sensor failure FMI 5 • Current below normal or open circuit • Open circuit in the 5 volt supply • Short circuit to ground in the metering line • Open circuit in the metering line • N/A • Faulty harness • Sensor Failure FMI 10 • Abnormal rate of change • After treatment injector fuel pressure sensor stuck • N/A • Sensor • Faulty shut off valve • Injector failure