BAIC — BAIC AT Commands User Manual: Serial Interface, Commands, and More

AT Commands User Manual Note: the optional response field is not returned when +CSMS=1 (t.b.d.) 39 10.13 Write message to memory +CMGW Command syntax Description Command syntax in text mode: AT+CMGW= , , Command syntax in PDU mode: AT+CMGW= , In text mode: AT+CMGW=”091137880” “This is the text” if PDU mode: AT+CMGW=52, This execution command stores message (SMS-DELIVER or SMS-SUBMIT) to memory storage . Memory location of the stored message is returned. separates the parameter part from the text part of the edited SMS in text mode. indicates that the SMS shall be sent, while indicates aborting of the edited SMS. +CMGW: OK or CMS ERROR: Test command AT+CMGW=?

OK 10.14 Send message from storage +CMSS Command syntax Description AT+CMSS= , , AT+CMSS=2 This execution command sends the message with location value from the preferred message storage to the network (SMS-SUBMIT or SMS- COMMAND). If a new recipient address is given for SMS SUBMIT, it shall be used instead of the one stored with the message. Reference value is returned to the TE on successful message delivery. If text mode: +CMSS: [, ] OK or CME ERROR: Test command AT+CMSS=?

OK 10.15 Set text mode parameters +CSMP Command syntax Description AT+CSMP= , , , AT+CSMP=17,167,0,0 This set command is used to select values for additional parameters needed when SMS is sent to the network or placed in storage when text format message mode is selected. It is possible to set the validity period starting from when the SM is received by the SMSC ( is in range 0...255) or define the absolute time of the validity period termination ( is a string). The format of is given by . OK or CME ERROR: Read command AT+CSMP? +CSMP: , , , OK Test command AT+CSMP=? OK