John Deere K Series Air-Cooled Engines — DISASSEMBLE RECOIL STARTER—FA130D-AN00

Starting Systems—FA130D/Recoil Starter—FA130D-AN00 DISASSEMBLE RECOIL STARTER—FA130D-AN00 1 Remove starter. 2. Pull handle out about 30 cm (1 ft). Tie knot (A) to prevent rope from winding back onto reel. TY15092 -UN-06DEC89 3. Pry knot (B) out of handle (C) and untie. 4. Remove handle from rope. 5. While holding reel with thumb, untie knot (A). Slowly release reel tension. Do not let rope get wedged between reel and housing. MX,2030A1,A7 -19-21OCT92 CTM5 (20OCT92) 20-30-4 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=91 5. Turn reel two turns counterclockwise to preload spring. 6. While holding reel to keep it from unwinding, feed end of rope through hole.

Tie knot (E) to hold rope. -UN-11MAR91 7. Install handle and secure with knot (D). 8. Remove knot (E). 9. Install spring (B), spring and pawl (A) and ratchet M80276 cover (C) with opening in cover over pawl. Check for free movement of pawl. 10. Pull rope to check for proper operation. A—Pawl B—Spring 11. Install recoil starter on engine. C—Retainer D—Knot E—Knot MX,2030A1,A6 -19-21OCT92 20 30 4