John Deere K Series Air-Cooled Engines — ASSEMBLE RECOIL STARTER

Starting Systems—FA210D/Recoil Starter FA210D-AS17/BS17/CS17: Place spring case (A) into reel with spring tang into catch (B). —Install reel with spring case into housing, aligning inner tang (C) with catch (D). M80304 -UN-11MAR91 4. Turn reel counterclockwise until you feel tang hook on catch. 20 31 5 A—Spring Case C—Inner Tang B—Reel Catch D—Housing Catch MX,2031A1,A7 -19-21OCT92 5. Place rope in notch (F), if equipped. Turn reel two turns counterclockwise to preload spring. 6. While holding reel to keep it from unwinding, feed end of rope through hole. Tie knot (E) to hold rope. M80276 -UN-11MAR91 M80305 -UN-11MAR91 7. Install handle and secure with knot (D). 8. Remove knot (E). 9.

Install spring (B), spring and pawl (A) and ratchet cover (C) with opening in cover over pawl. Check for free movement of pawl. FA210D-AS20 10. Pull rope to check for proper operation. 11. Install recoil starter on engine. A—Pawl B—Spring C—Retainer D—Knot E—Knot F—Notch FA210D-AS19-01/AS17/BS17/CS17 MX,2031A1,A8 -19-21OCT92 CTM5 (20OCT92) 20-31-5 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=100