Starting Systems/Recoil Starter ASSEMBLE RECOIL STARTER 1. Wind rope counterclockwise onto reel. 2. Apply multipurpose grease to spring. 3. Install reel with spring in housing. Align inner tang (A) with catch (B). M80303 -UN-11MAR91 4. Turn reel counterclockwise until you feel tang hook on catch. MX,2130A1,A5 -19-21OCT92 5. Place rope in notch (F) and turn reel two turns counterclockwise to preload spring. 6. While holding reel to keep it from unwinding, feed end of rope through hole. Tie knot (E) to hold rope. M80305 -UN-11MAR91 7. Install handle and secure with knot (D). 8. Remove knot (E). 9. Install spring (B) spring and pawl (A) and ratchet cover (C) with opening in cover over pawl.
Check for free movement of pawls. 10. Pull rope to check for proper operation. A—Pawl B—Spring C—Retainer 11. Install recoil starter on engine. D—Knot E—Knot CTM5 (20OCT92) 21-30-3 K Series Air Cooled Engine MX,2130A1,A6 -19-21OCT92 AllTractorManuals.com 220596 PN=140 REPLACE SPRING N CAUTION: Spring is wound under great tension in reel or spring case. Do not let spring fly loose. Hold spring firmly in place while replacing. -UN-11FEB91 1. Working from the center out, carefully unwind spring from reel. 2. Hook outside spring tang in reel. Wind spring into M80195 reel, working toward center. MX,2130A1,A4 -19-21OCT92 21 30 3