John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL VALVES AND SPRINGS

Cylinder Block, Valves and Internal Components/Remove and Install Valves and Springs CTM5 (20OCT92) 25-20-2 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=159 REMOVE AND INSTALL VALVES AND SPRINGS 1. Remove carburetor. (See Group 05.) 2. Remove cylinder head. (See Group 15.) -UN-02APR91 3. Remove tappet chamber cover/breather. IMPORTANT: Mark and keep springs and valves together. M80355 4. Compress valve spring (C) with a spring compressor (A) and remove valve sleeve (E). A—Spring Compressor 5. Remove compressor, valves, springs and retainers. B—Valve C—Spring D—Spring Retainer 6. Inspect and analyze valves. (See Section 100, Group E—Valve Sleeve 05.) F—Drainback Hole 7.

Inspect springs, valve guides and seats. (See this group.) 8. Check valve-to-tappet clearance. (See this group.) 9. Check that drainback hole (F) is open. 10. Align valve springs and retainers in tappet chamber. 11. Coat valve stems with oil and install in cylinder block. 12. Compress each spring and install valve sleeves. 13. Install tappet chamber cover/breather and new gasket. 14. Install cylinder head. 15. Install carburetor. MX,2520A1,A1 -19-21OCT92 25 20 2