Group 25 Ignition and Charging System ADJUST ARMATURE AIR GAP 1. Turn flywheel magnet away from armature. 2. Insert feeler gauge blade (B) between flywheel and armature. M80388 -UN-02APR91 3. Push armature against flywheel and tighten screws (A). 4. Turn flywheel to remove feeler gauge. AIR GAP SPECIFICATIONS Feeler Gauge Blade . . . . . . . . . . . . . . . . . . . . 0.30 mm (0.012 in.) MX,2525A1,A2 -19-21OCT92 CTM5 (20OCT92) 25-25-1 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=180 REMOVE AND INSTALL ARMATURE WITH COIL 1. Remove blower housing. (See Group 10.) 2. Remove fuel tank. (See Group 05.) -UN-02APR91 3. Disconnect wiring lead (B). 4.
Remove cap screws (C) and armature with coil (A). M80387 5. Loosely install armature with coil. 6. Connect wiring lead. 7. Adjust armature air gap. (See this group.) 8. Install fuel tank. 9. Install blower housing. MX,2525A1,A1 -19-21OCT92 25 25 1