Cylinder Head and Valves/Remove and Install CTM5 (20OCT92) 30-15-4 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=201 IMPORTANT: Gasket surfaces are coated with sealant. Do not damage surfaces or gasket during installation. 11. Install cylinder head assembly with new gasket. Install cap screws and tighten finger tight. -UN-07SEP88 12. Tighten cap screws in sequence shown. Tighten to initial torque specifications. 13. Continue in sequence, 3 N·m (27 lb-in.) at a time, M51748 until final torque is as specified. 14. Install spark plug and tighten to specification. 15. Connect spark plug wiring lead. 16. Install heat shields. 17. Connect armature wiring lead. 18.
Install new gasket, muffler and muffler shield. 19. Install rocker arm assembly. 20. Install carburetor. 21. Install engine cover. TORQUE SPECIFICATIONS Initial Torque . . . . . . . . . . . . . . . . . . . . . . . . . . 18 N·m (159 lb-in.) Final Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 N·m (212 lb-in.) Spark Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 N·m (177 lb-in.) MX,3015A1,A3 -19-21OCT92 30 15 4