John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL ARMATURE WITH COIL

Group 25 Ignition and Charging System REMOVE AND INSTALL STATOR 1. Remove flywheel. (See Group 10.) 2. Disconnect stator lead from wiring connector (A). 3. Remove screws (C) and stator (B). M80189 -UN-11FEB91 4. Install stator. 5. Connect stator lead. 6. Install flywheel. MX,3025A1,A1 -19-21OCT92 CTM5 (20OCT92) 30-25-1 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=226 REMOVE AND INSTALL ARMATURE WITH COIL 1. Remove engine cover. (See Group 10.) 2. Disconnect wiring lead (A). -UN-11FEB91 3. Remove cap screws (B) and armature with coil (C). 4. Loosely install armature with coil. M80190 5. Connect wiring lead. 6. Adjust armature air gap. (See this group.) 7. Install engine cover.

MX,3025A1,A2 -19-21OCT92 30 25 1