John Deere K Series Air-Cooled Engines — ANALYZE ELECTRIC STARTER CONDITION

Starting Systems/Electric Starter ANALYZE ELECTRIC STARTER CONDITION 1. The starter overheats because of: • Long cranking. • Armature binding. 2. The starter operates poorly because of: • Armature binding. • Dirty or damaged starter drive. • Badly worn brushes or weak brush springs. • Excessive voltage drop in cranking system. • Battery or wiring defective. • Shorts, opens, or grounds in armature. NOTE: Starter repair is limited to brushes, end caps, and starter drive. Fields in starter are permanent magnets and are not serviceable. If housing or armature is damaged, replace starter.

CTM5 (20OCT92) 30-30-4 K Series Air Cooled Engine MX,3030A1,A8 -19-21OCT92 AllTractorManuals.com 220596 PN=231 6. Place rope in notch (A). Turn reel counterclockwise until you feel tang hook on catch. 7. Turn reel two turns counterclockwise to preload spring. 8. While holding reel to keep it from unwinding, feed end of rope through guide. Tie knot (B) to hold rope. 9. Install handle and secure with knot (C). 10. Remove knot (B). 11. Pull rope to check for proper operation. 12. Install recoil starter on engine. -UN-11FEB91 M80199 MX,3030A1,A7 -19-21OCT92 30 30 4