Cylinder Head/Cylinder Head INSPECT CYLINDER HEAD 1. Remove carbon deposits from combustion chamber and gasket surface using SCOTCH-BRITE abrasive pads or an equivalent. 2. Clean head with solvent. M80458 -UN-17MAY91 3. Inspect for cracks or broken cooling fins. 4. Inspect gasket surface for burrs and nicks. 5. Inspect head gasket for burns and traces of gas leakage. Replace if necessary. 6. Put cylinder head (A) on a surface plate. Check for distortion at several points around the head using a feeler gauge (B). Replace head if distortion is more than specifications. SPECIFICATIONS Cylinder Head Distortion (Max) . . . . . . . . . . . . .
0.40 mm (0.015 in.) MX,3515A1,A2 -19-21OCT92 35 15 2 CTM5 (20OCT92) 35-15-2 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=245