Group 25 Ignition and Charging System CTM5 (20OCT92) 35-25-1 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=270 REMOVE AND INSTALL STATOR AND PULSER COIL NOTE: Stator and pulser coil must be replaced as an assembly. 1. Remove flywheel. (See Group 10.) 2. Remove housing (B). 3. Remove screws and stator (A). 4. Remove base plate (C). 5. Remove bracket (D). 6. Remove screws and pulser coil (E). 7. Remove stator and pulser coil assembly. -UN-17MAY91 8. Install stator and pulser coil assembly. 9. Install pulser coil and bracket. 10. Install base plate. M80483 11. Install stator. 12. Install cover. 13. Install flywheel.
A—Stator -UN-17MAY91 B—Housing C—Base Plate D—Bracket E—Pulser Coil M80484 MX,3525A1,A1 -19-21OCT92 35 25 1