Starting Systems/Replace Brushes TEST FIELD COIL 1. Test for continuity between brush to housing. Replace field coil if there is no continuity. M80489 -UN-17MAY91 MX,3530A1,A9 -19-21OCT92 2. Test for continuity between negative brush holder (A) and brush plate. Replace brush holder assembly if there is continuity. 3. Test for continuity between positive brush holder (B) and brush plate. Replace brush holder assembly if there is no continuity. M80490 -UN-17MAY91 MX,3530A1,A10 -19-21OCT92 CTM5 (20OCT92) 35-30-6 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=277 REPLACE BRUSHES 1. Melt solder from brush lead connection to replace field coil brush.
Cut off old brush to replace brush (A) on brush plate assembly. -UN-17MAY91 2. Install new brushes using only 60—40 rosin core solder. Newly installed wire should be approximately same length as original. M80491 MX,3530A1,A11 -19-21OCT92 35 30 6