John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL CARBURETOR—FC400V/FC420V

Fuel and Air Systems/Remove and Install Carburetor CTM5 (20OCT92) 40-05-3 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=290 5. Separate carburetor from heat shield (C). Remove carburetor. 6. Disconnect choke linkage (B) and throttle control linkage (A). -UN-09JAN91 7. Remove heat shield (C) and gaskets. 8. Make repairs as necessary. (See procedure in this group.) M80004 9. Install gaskets and heat shield. 10. Connect linkage and install carburetor. NOTE: Install gasket (D) with hole (E) pointing toward fuel inlet side of carburetor and tab (F) pointing up. -UN-09JAN91 11. Install gasket (D) and air cleaner assembly. 12. Connect wiring lead. 13. Install washer and two nuts.

M80005 14. Connect fuel hose. A—Throttle Control Linkage B—Choke Linkage C—Heat Shield D—Gasket E—Hole -UN-09JAN91 F—Tab M80006 MX,4005A1,A6 -19-21OCT92 40 05 3