John Deere K Series Air-Cooled Engines — SERVICE BREATHER

Fuel and Air Systems/Service CTM5 (20OCT92) 40-05-9 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=296 SERVICE BREATHER NOTE: Breather is located in cylinder block of FC290V engine, and in cylinder heads of FC400V, FC420V and FC540V engines. -UN-07SEP88 1. FC290V: Remove blower housing. (See Group 10.) Remove breather cover. FC400V/FC420V/FC540V: Remove rocker arm cover. M51757 2. Measure air gap between reed valve (A) and valve seat (B) at valve tip. Replace reed valve if gap exceeds specification. 3. Remove breather valve (C). 4. Inspect breather for sticking, binding, cracks or -UN-09JAN91 distortion. Replace breather if worn or damaged. 5. Inspect valve seating surface.

Surface must be free of nicks or burrs. M54498 NOTE: On FC290V engine, check that drain back slot in breather chamber is open. FC290V 6. Install breather assembly. AIR GAP SPECIFICATIONS (MAX) FC290V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.20 mm (0.008 in.) FC400V/FC420V/FC540V . . . . . . . . . . . . 1—2 mm (0.040—0.080 in.) -UN-09JAN91 M54486 FC400V/FC420V/FC540V MX,4005A1,A13 -19-21OCT92 40 05 9