John Deere K Series Air-Cooled Engines — INSPECT STARTER—FC540V

Starting Systems/Inspect Electric Starter CTM5 (20OCT92) 40-30-11 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=358 INSPECT STARTER—FC540V -UN-31AUG88 M50120 A—Front Cover F—Pinion J—Spring N—Brush Holder B—Shift Lever G—Armature K—Washer O—Brush C—Solenoid H—Dust Cap L—End Cover P—Brush Spring D—Retaining Clip I—Clip M—Washer Q—Body E—Pinion Stopper 1. Mark body and covers for correct alignment during 5. Test starter armature and brushes. (See this reassembly. group.) 2. Push pinion stopper (E) toward pinion (F) to 6. Apply a thin coat of multipurpose grease to: remove retaining clip (D). —sliding surfaces of armature and solenoid shift lever. 3.

Inspect parts for wear or damage. —armature shaft spline. —points where shaft contacts cover. 4. Measure brushes. Replace brushes as a set if length of any one is less than 10.5 mm (0.413 in.). 7. Assemble starter. MX,4030A1,A12 -19-21OCT92 40 30 11