John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL CARBURETOR

Fuel and Air Systems/Carburetor CTM5 (20OCT92) 45-05-2 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=367 REMOVE AND INSTALL CARBURETOR 1. Drain fuel from carburetor. 2. Disconnect hose (B). -UN-25APR91 3. Disconnect spring (D). 4. Remove duct (A), bracket (E) and gaskets (F). 5. Disconnect linkage (C). M80399 6. Separate carburetor from heat shield (H). Remove carburetor. 7. Remove heat shield (H) and gaskets. 8. Make repairs as necessary. (See procedure in this group.) -UN-25APR91 NOTE: Install gasket (I) with tab pointing up on fuel inlet side of carburetor. 9. Install gaskets and heat shield. M80400 10. Install carburetor. 11. Connect linkage. NOTE:

Install gaskets (F) with hole (J) pointing away from fuel inlet side of carburetor. -UN-25APR91 12. Install gaskets, bracket and duct. 13. Connect return spring. 14. Connect breather hose. M80401 A—Air Intake Duct B—Breather Hose C—Throttle Control Linkage D—Return Spring E—Bracket F—Gaskets G—Gasket H—Heat Shield I—Gasket J—Hole MX,4505A1,A2 -19-21OCT92 45 05 2