John Deere K Series Air-Cooled Engines — REMOVE AND INSTALL FLYWHEEL

Group 10 Blower Housing and Flywheel REMOVE AND INSTALL BLOWER HOUSING NOTE: It is not necessary to remove recoil starter, if equipped, from blower housing. 1. Disconnect spark plug lead. M53063 -UN-11APR89 2. Disconnect breather hose (A). 3. Remove covers (B). 4. Remove blower housing (C). 5. Install blower housing and covers. 6. Connect hose and spark plug lead. MX,4510A1,A1 -19-21OCT92 CTM5 (20OCT92) 45-10-1 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=372 REMOVE AND INSTALL FLYWHEEL 1. Remove armature with coil. (See Group 25.) 2. Hold flywheel and remove nut and washer (A). -UN-25APR91 3. Remove starter cup, if equipped. 4. Remove flywheel using a flywheel puller. 5.

Install flywheel and cup, if equipped. M80404 NOTE: Install washer with concave side toward flywheel. 6. Install washer and nut. Tighten nut to 85 N·m (63 lb-ft). 7. Install armature with coil. MX,4510A1,A2 -19-21OCT92 45 10 1