Cylinder Head and Valves/Replace Valve Guide Bushings REPLACE VALVE GUIDE BUSHINGS 1. Drive valve guide bushing (A) into valve chamber (B) using JDG-504 Valve Guide Driver. M50038 -UN-06APR91 MX,4515A1,A9 -19-21OCT92 2. Clean carbon deposits from valve guide port. 3. Install new bushing with valve guide driver. Drive in from valve chamber side to an installation depth of 12 mm (0.472 in.) for the FC400V/FC420V and 9.5 mm (0.37 in.) for the FC540V. M50039 -UN-15OCT92 MX,4515A1,A9A -19-21OCT92 CTM5 (20OCT92) 45-15-6 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=379 4. Finish reaming valve guide bushings with stanisol or kerosene lubricant and a 7 mm valve guide reamer.
Turn reamer clockwise. 5. Thoroughly clean valve area before assembly. -UN-25APR91 BUSHING FINISHED I.D. SPECIFICATIONS Valve Guide . . . . . . . . . . . . . . . . . . 7—7.02 mm (0.275—0.276 in.) M80411 MX,4515A1,A10 -19-21OCT92 45 15 6