John Deere K Series Air-Cooled Engines — DISASSEMBLE AND ASSEMBLE OIL PUMP

Cylinder Block and Internal Components/Oil Pump 8. Hone the cylinder an additional 0.028—0.030 mm (0.0011—0.0012 in.) for final bore specifications. This allows for 0.020 mm (0.0008 in.) shrinkage when cylinder cools. IMPORTANT: DO NOT use gasoline or commercial solvents to clean cylinder bores. Solvents will not remove metal particles produced during honing. 9. Clean the cylinder thoroughly using soap, warm water and clean rags. Continue to clean cylinder until white rags show no discoloration. 10. Dry the cylinder. Apply engine oil to cylinder wall.

M98,2040A,A9 -19-21OCT92 CTM5 (20OCT92) 45-20-21 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=402 DISASSEMBLE AND ASSEMBLE OIL PUMP 1. Remove stator. (See Group 25.) 2. Remove cover, gasket and plate (A). -UN-11APR89 3. Remove oil pump assembly (B), relief valve (C), ball and spring (D). 4. Inspect all parts. (See this group.) M53070 5. Install oil pump assembly, relief spring, ball and valve. 6. Install plate, gasket and cover. A—Plate 7. Install stator. B—Oil Pump Assembly C—Relief Valve D—Relief Spring and Ball MX,4520A1,A33 -19-21OCT92 45 20 21