Fuel and Air Systems/Remove and Install REMOVE AND INSTALL CARBURETOR 1. Remove air cleaner assembly (A). 2. Disconnect hose (C). Close all openings using caps and plugs. M54781 -UN-19FEB91 M54575 -UN-21SEP90 3. Remove cap screws and duct (B). 4. Disconnect linkage (D and E). 5. Remove carburetor with gaskets. 6. Make repairs as necessary. (See procedures in this group.) 7. Connect linkage. NOTE: When installing cap screws make sure to install ground wire (F), if equipped, between head of cap screw and air intake duct. 8. Install carburetor, gaskets and duct. Tighten cap screws. 9. Connect fuel hose. 10. Install air cleaner assembly.
A—Air Cleaner Assembly B—Air Intake Duct C—Fuel Hose D—Throttle Control Linkage E—Choke Control Linkage F—Ground Wire MX,5005A1,A2 -19-21OCT92 50 05 2 CTM5 (20OCT92) 50-05-2 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=421