Starting Systems/Recoil Starter ASSEMBLE RECOIL STARTER 1. Wind rope counterclockwise onto reel. 2. Place spring case (B) into housing with spring tang over catch (C). TY13499 -UN-23FEB89 3. Install reel in spring case, with round peg (E) aligned with end of spring (F). 4. Turn reel counterclockwise until you feel tang hook on catch. A—Spring B—Case C—Catch D—Reel E—Round Peg F—End of Spring MX,5030A1,A5 -19-21OCT92 CTM5 (20OCT92) 50-30-4 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=467 5. Turn reel two turns counterclockwise to preload spring. 6. While holding reel to keep it from unwinding, feed end of rope through hole. Tie knot (A) to hold rope. 7.
Install handle and secure with knot (B). 8. Remove knot (A). 9. Install spring (C) and ratchet cover (E) with opening(s) in cover over pawl(s) (D). Check for free movement of pawls. 10. Pull rope to check for proper operation. 11. Install recoil starter on engine. A—Knot B—Knot -UN-23FEB89 C—Spring D—Pawls E—Retainer TY13500 MX,5030A1,A6 -19-21OCT92 50 30 4