John Deere K Series Air-Cooled Engines — ANALYZE PISTON WEAR

Piston, Piston Rings, Crankshaft and Connecting Rod/Analyze Check rod and piston alignment when piston shows a diagonal wear pattern (A) extending across the skirt of the piston. Contact with the cylinder wall shows on bottom of skirt at left and ring lands on the right. A cylinder bored at an angle to the crankshaft can also cause improper ring contact with the cylinder. This condition causes: M29948 -UN-06SEP88 1. Rapid piston wear. 2. Uneven piston wear. 3. Excessive oil consumption. MX,2420G,73 -19-21OCT92 A broken retaining ring caused the damage (A) shown. Retaining rings loosen or break due to: 1. Rod misalignment. 2. Excessive crankshaft end play. 3. Crankshaft journal taper. 4.

Weak retaining rings. 5. Incorrectly installed retaining rings. M29949 -UN-06SEP88 Inertia can cause a broken retaining ring to beat out the piston and cylinder, causing extensive damage. MX,2420G,74 -19-21OCT92 100 10 4 CTM5 (20OCT92) 100-10-4 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=481